液压油

Series M – Rotoflux 5 Passages with a Centre Bore

The ROTOFLUX unions model M, thanks to the special design of the seals and the surface of the rotor ground, hardened and lapped may operate at high fluid pressure and low rotation speed with low friction and wear, for long time.

Also they may remain inactive for long periods without seizing. An antirotation pin is provided to prevent the rotation; stop it with a slack slot. To avoid contamination in case of leaks, it is necessary that one only type of fluid flows in both passages.

Avoid to operate the union under pressure surges, and, at the max suggested operating limits, without consulting the ROTOFLUX customer service.

Special version for clean water available.

 
Aria – Air – Luft – Aire 10 bar / 145 PSI 90°C / 195°F 80
Olio idraulico | Hydraulic oil 250 bar / 3.625 PSI 50 bar / 725 PSI – 80
250 bar / 3.625 – 10
Hydraulikol | Aceteite Hidraulico
Ordering code Giunti a cinque passaggi – Five passages unions 5-Wege Drehdurchführungen – Juntas de cinco vías
Hydraulic oil Air B ø C ø D E ø F I L M N1 N2 O ø P ø Q ø R ø S ø T ø U V ø X Y Z Kg
M510-000-F80 M510-300-F80 G 3/8″ 80 10 5×72° 270 178 15 255 89,5 24 29 54 135 165 195 13 8×45° 16 102 20 18 50 143 28

© 2016 Copyright - Rotofluxasia - All rights reserved |宁波罗拓福斯自动化技术有限公司